C4 Excavator Mulching Head – FL100-130 – 6 to 16 Tonne Excavator
£7,690.00 – £9,790.00 Exc. VAT
C4 Excavator Mulching Head – 6 to 16 tonne
Manufactured by C4 Meccaninca Srl. in Italy, since 1973. With such extensive industry knowledge, these excavator flail and mulcher heads are of the highest quality – designed for professional users.
The FL130 excavator mulching head is fitted with Hammer blades as standard
Forestry mulcher heads, flail heads for mini-excavators, mulcher heads for skid steers and even earth drills and mixing buckets for excavators and telehandlers, are all manufactured in house using the finest European components. Thanks to leading edge machinery, a highly qualified work force and outstanding manufacturing procedures, C4 Meccanica is one of the finest European producers of excavator flail heads.
C4 Excavator Flail Heads
- 100% Made in Italy
- Anti-cavitation flow adjustment valve included
- Heavy Duty – Typically 20% stronger & heavier than other brands
- Flotation device fitted as standard
- Excavator headstock included
- Fitted with Cassapa hydraulic motor
- Hydraulic hoses included (not quick couplings)
- UK stock
The FL100, 130 & 160 excavator mulcher heads will fit a wide range of excavators between 6 and 16 tonnes, that have a minimum oil flow of 60 l/min.
All C4 excavator flails are fitted with the highest quality Casappa hydraulic motors.
Although an additional case drain line is not specifically required, the back pressure in the excavators return line must not exceed 10 bar of pressure if used without one. This can usually be achieved on most excavators, particularly if there is a free flow return to tank option on the excavator dashboard. However, for best performance and motor seal longevity, a case drain line is advised.
